Extruded Boat Channel Marine Fender Large Pneumatic Fenders
Yokohama
Pneumatic rubber fender introduction
The fender is mainly to withstand the impact force of the ship when
the ship is docking, leaving the dock and other forms (such as when
the ship is tied to tow), and transmits it to the hull structure of
a larger area. Wooden fenders have buffering effect. Although steel
fenders have poor buffering effect, they have better strength and
can be included in the section of the hull girder (the welding
strength must be guaranteed). Especially for large-open deck
barges, they can make up for the deck The lack of effective
cross-sectional area is conducive to longitudinal strength. Steel
materials cannot be used for the fenders of oil barges and small
oil tankers.
Large seagoing vessels usually do not have fenders. River boats,
work boats, permanent double-track fenders, one of which is located
on the upper deck, and the other is located slightly higher than
the designed waterline
1. Pneumatic rubber fender introduction
1 Outer rubber
The outer rubber layers that covers the outside of fender protects
the cord layers and the inner rubber from abrasion and other
external forces. This compound has sufficient tensile and tear
strength to withstand any weather condition and hard usage.
Standard color is black, but other colors are available on request.
2 Inner rubber
The liner of a rubber membrane seals the pressurized air inside the
fenders.
3 Synthetic tire cord layers for reinforcement
The reinforcement layers, which are made of synthetic tire cord
commonly used in tires, are arranged at ideal angles to hold the
internal pressure and to distribute the stress evenly providing
strong efficient reinforcement.
4 Beading ring
A steel ring is placed at one end (or both ends) of the fender and
holds the end of cord layers.
5 Flange
A steel flange is mounted on the fender, to which an air valve or
safety valve can be adapted.
6 Safety valve
Fenders of diameter 2500mm and larger shall be equipped with safety
valve for releasing excess internal pressure when the fenders are
over-compressed accidentally. Fender which are smaller than 2500mm
in diameter, can be equipped with a safety valve if required.
7 Metal accessories
All the relevant metal accessories of pneumatic fenders, include
shackles, towing rings, swivels, chain net, are made of stainless
steel, which are resistant for sea water corrosion.
Pneumatic rubber fender Parameter
| Ship Tonnage(T) | Recommendation SizeD×L(m) | Ship Type |
| 50 | 0.5*1.0 | Fishing ship |
| 100 | 0.7*1.5~1.0*1.5 | Fishing ship |
| 200 | 1.0*1.5~1.2*2.0 | Fishing ship,towing ship |
| 300-500 | 1.2*2.0~1.5*2.5 | Fishing ship,towing ship |
| 1000 | 1.5*2.5~1.5*3.0 | Towing ship,cargo ship |
| 3000 | 2.0*3.0~2.0*3.5 | cargo ship,ocean trawler |
| 10000 | 2.0*3.5~2.5*4.0 | cargo ship |
| Pneumatic 80 fender size and performance requirements |
Nominal size diameter x length mm | Initial internal pressure kPa | Guaranteed energy absorption (GEA) | Reaction force at GEA deflection (R) | Hull pressure (Internal pressure) at GEA deflection (P) |
| Minimum value at deflection 60±5% kJ | Tolerance±10% kN | Reference value kPa |
| 500 x 1000 | 80 | 8 | 85 | 174 |
| 600 x 1000 | 80 | 11 | 98 | 166 |
| 700 x 1500 | 80 | 24 | 180 | 177 |
| 1000 x 1500 | 80 | 45 | 239 | 160 |
| 1000 x2000 | 80 | 63 | 338 | 174 |
| 1200 x 2000 | 80 | 88 | 390 | 166 |
| 1350 x 2500 | 80 | 142 | 561 | 170 |
| 1500 x 3000 | 80 | 214 | 761 | 174 |
| 1700 x 3000 | 80 | 267 | 840 | 168 |
| 2000 x 3500 | 80 | 430 | 1150 | 168 |
| 2500 x 4000 | 80 | 925 | 1815 | 180 |
| 2500 x 5500 | 80 | 1317 | 2653 | 195 |
| 3300 x 4500 | 80 | 1640 | 2476 | 171 |
| 3300 x 6500 | 80 | 2532 | 3961 | 191 |
| 3300 x 10600 | 80 | 4281 | 6907 | 208 |
| 4500 x 9000 | 80 | 6633 | 7551 | 192 |
| 4500 x 12000 | 80 | 9037 | 10490 | 202 |
About service:
1. In the future, I will be responsible for the business docking of
your company, and I will serve the whole process by myself to
reduce communication time.
2. I will add you in our company's VIP customer list, and we will
deal with your business as the focus in the first time
