STS Inflatable 3.3m Boat 0.08MPA Pneumatic Rubber Fender
Pneumatic rubber fender introduction
The fender is mainly to withstand the impact force of the ship when
the ship is docking, leaving the dock and other forms (such as when
the ship is tied to tow), and transmits it to the hull structure of
a larger area. Wooden fenders have buffering effect. Although steel
fenders have poor buffering effect, they have better strength and
can be included in the section of the hull girder (the welding
strength must be guaranteed). Especially for large-open deck
barges, they can make up for the deck The lack of effective
cross-sectional area is conducive to longitudinal strength. Steel
materials cannot be used for the fenders of oil barges and small
oil tankers.
Large seagoing vessels usually do not have fenders. River boats,
work boats, permanent double-track fenders, one of which is located
on the upper deck, and the other is located slightly higher than
the designed waterline.
Pneumatic rubber fender Parameter
Ship Tonnage (DWT) | Assumed Boarding Speed (M/S) | Effective Kinetic Energy (KN.M) | Fender Size D*L (m) |
| 200000 | 0.15 | 1890 | 3.3 x 6.5 |
| 150000 | 0.15 | 1417 | 3.3 x 6.5 |
| 100000 | 0.15 | 945 | 3.0 x 5.0 |
| 85000 | 0.17 | 1031 | 3.0 x 6.0 |
| 50000 | 0.18 | 680 | 2.5 x 5.5 |
| 40000 | 0.20 | 672 | 2.5 x 5.5 |
| 30000 | 0.22 | 609 | 2.5 x 4.0 |
| 20000 | 0.25 | 525 | 2.5 x 4.0 |
| 15000 | 0.26 | 425 | 2.5 x 4.0 |
| 10000 | 0.28 | 329 | 2.0 x 4.0 |
| 5000 | 0.33 | 228 | 2.0 x 3.5 |
| For Large-tonnage Ship |
Pneumatic Rubber Fender Features
"Yokohama Pneumatic Inflatable Rubber Fender " progress in the
development of such floating pneumatic rubber fenders is closely
related to the progress and development of ship technology, and has
to continuously cope with progressively larger oil tankers such as
VLCC's, ULCC's, large gas carriers, bulk carriers and floating
structures.
Floating pneumatic fenders are used world wide for
ship-to-ship (STS) transfer operations, terminals, and for all
kinds of ships.
Pneumatic Rubber Fender Transportation
Transportation We can take the deflation pallet transportation and
the entire fender transportation without deflation according to the
requirements of customers. We always put the customer's
requirements first.
Pneumatic Rubber Fender Application
Pneumatic Rubber Fenders are suitable for many applications
including:
1. Tankers, Gas Carries and Bulk Cargo Ships;
2. Fast ferries and aluminum hulled vessels;
3. Temporary of permanent installations;
4. Rapid response and emergency fendering;
5. As stand-off fenders to realign ships with shore facilities.
Pneumatic Rubber Fender Types
Type I: pneumatic rubber fender with Chain & tyre net protective
jacket
Type II: Sling type with rubber plate, rubber tube & ropes
protective jacket
Type III: Ribbed type rubber fender
Type IV: Rope net type protective jacket rubber fender
Type V: Standard type without any protective jackets
Type VI: hydro pneumatic rubber fender
Specially Designed and Strengthened Casting Flange
Henger Flange is casting of corrosion-resistant iron with
galvanized anti-corrosive coating, which will strongly prolong the
fender quality and service life. The strength of Henger casting
flange improves 40% higher than traditional type.
